HD-MILL DISCHARGE HOSE has a 100% polyester jacket with a single ply extruded (SBR) rubber liner. Ideal for open end water transfer and wash down work.
2G59/1D has a 100% synthetic double jacket construction with a single ply extruded flame resistant rubber liner. For use where water pressures do not exceed 300 PSI (MSHA 4-1 requirements)
Poly 300-S has a 100% polyester jacket with a high grade single ply extruded (SBR) rubber liner. Designed for Emergency Fire Protection with water pressure not exceeding 135 PSI per NFPA 1961.
INDUSTRIAL ATTACK 600 is a 100% polyester, double jacket construction with high grade single ply extruded (SBR) rubber liner. Totally immune to the effects of mildew.
POLY 500-S has a 100% polyester jacket with a high grade single ply extruded (SBA) rubber liner. Designed for Emergency Fire Protection with water pressure not over 225 PSI per NFPA 1961.
INDUSTRIAL ATTACK 800 is 100% polyester, double jacket construction with high grade single ply extruded (SBR) rubber liner. Totally immune to effects of mildew.
POLY 600-S has 100% polyester jacket with high grade single ply extruded (SBR) rubber liner. Designed for Emergency Fire Protection with water pressure not over 270 PSI per NFPA 1961.
INDUSTRIAL ATTACK PLUS is 100% polyester, double jacket construction with single ply polyurethane extruded liner. Totally immune to effects of mildew. Exceeds all attack hose NFPA requirements.
POLY-RACK 500 has 100% synthetic jacket with a single ply polyurethane extruded liner. Designed for Emergency Fire Protection with water pressures not exceeding 225 PSI per NFPA 1961.
INDUSTRIAL 500, and INDUSTRIAL 600 have 100% synthetic reinforcement construction totally encapsulated in a nitrile rubber compound using through-the-weave extrusion process.
2G59/1S TM has a 100% synthetic single jacket construction with a single ply extruded flame resistant rubber liner. Meets MSHA mine use requirements where water pressures not over 200 PSI. (MSHA 4-1 requirements)
NEO-TUFF 400 TM has a 100% synthetic reinforcement with a high grade single ply (SBR) rubber liner. Outer cover is a heavy duty neoprene compound for lasting protection from abrasion. Ideally suited for Petrochemical and Refinery Industries.
SYN-TUFF 400 TM has a 100% synthetic reinforcement with a high grade single ply (SBR) rubber liner> Outer cover is a heavy duty synthetic compound providing lasting protection from abrasion.
DURA-CAF 800 TM is a 100% synthetic,(Cordura R Grade 6-6 polyamide warp) compact double jacket construction, single-ply extruded polyurethane liner. For Compressed Air Foam systems.
OUTBACK 600 TM has a 100% synthetic polyester jacket with an extremely fine twill weave to improve abrasion resistance and to resist snapping. Totally immune to mildew and incorporates an extruded polyurethane liner.
FHS-HD FIRE ENGINE HARD SUCTION HOSE is heavy duty wire reinforced with an ozone resistant cover
OUTBACK 600 HD TM utilizes the same jacket construction as OUTBACK 600 TM while incorporating a light gauge rubber liner for improved puncture resistance where thorns or cactus are a concern.
FHS-CHD ENGINE CORRUGATED HARD SUCTION HOSE is flexible wire reinforced with an ozone resistant cover.
WILD FIRE-500 TM has a synthetic jacket with a single ply polyurathane extruded liner. Totally immune to mildew and designed for rigorous task of fighting wild-land and forestry fires. The special tight weave creates a very durable jacket.
FHS-MD FIRE ENGINE HARD SUCTION HOSE is medium duty wire reinforced with an ozone resistant cover.
NAFH-187 TM has a 100% synthetic jacket with a single ply polyurethane extruded liner. Totally immune to mildew. Comparable to USFS 5100-187 specification.
DB-SS4-D TM is 100% synthetic, double jacket construction with extruded (SBR) rubber liner. Outside jacket impregnated with Ultra-Shield TM high-tech polymer for added abrasion & moisture resistance.
MAFH-186 TM has a cotton polyester jacket with a high grade single ply extruded (SBR) rubber liner. The jacket has been treated against the effects of mildew in accordance with USFS requirements for 5100-186. This type of forestry (wild-land fire protection) fire hose is desirable when hose melting and burning is a major concern.
BH-800 BOOSTER HOSE is a braided construction with an ozone resistant cover available n lengths up to 200 Ft.
BL-300 BOOSTER HOSE is a braided construction with an ozone resistant cover available in lengths up to 200 Ft.
American Fire Protection 1530 1st Avenue South Seattle, WA 98134
PHONE: 1-800-433-5715 or 206-623-4208, FAX: 206 623-4133
E-Mail: Americanfireprot@qwest.net
To request literature or other information via e-mail please select
"Contact Us" from the menu
